DIY tasks can be really satisfying– not to mention much cheaper! If you’re block paving your patio or driveway, there’s no reason to get someone else in; as long as you’ve got the time and inspiration to do it on your own it’s in fact pretty easy and also very easy to discover. Simply make sure you have the best tools and you’re good to go!

Organise Exactly How You Want It

The very first step is to choose exactly how you want your block paving to look. If you’re replacing old paving, exactly what didn’t you like regarding it? What renovations could you make? You ought to think about the overall shape, sensible elements (such as dimension) and pattern of the bricks. It’s additionally a great idea to think about what colour bricks will well go with your residence– you don’t want anything to clash.

Excavation

Next off, you’re going to wish to prepare the location. Define a location and dig it out, making sure to dig far enough down to ensure that your paving will be despite the surrounding surface area. For this, you should utilise plant tools such as a tiny excavator or a JCB.

Set A Sub-base

Create a sub-base to develop the structures of your block paving. Your sub-base needs to go to least 100mm thick, and it can be a good idea to place it above a layer of weed-fabric, to prevent weeds from growing with your pavement. Finish your sub-base by going over it with a vibrating place. This will squash it down and level it.

Edge Restraints For Your Block Paving

Place edge restraints down to define the side of your paving. They need to be firm and helpful as the outer area is the weakest part of the paving. They will certainly additionally work as an overview for the shape of your block paving.

Screeding Your Area

Next, you’ll need to screed the area, contributing to the structures and making a rank surface area for the paving to sit on. Place about 50mm of somewhat damp sharp sand down and make use of a vibrating plate again to smooth and establish. Then put down a 2nd layer, just the same as the initial.

Lay Down The Bricks

Finally, you could begin putting down your bricks. For the best finish, begin at the bottom of an incline and move up. The joints of the bricks ought to overlap– just like in a wall– so you’ll be entrusted spaces that you’ll need to fill in with cuts of brick. As soon as your block paving is down and all the brick are correctly positioned, sweep some kiln dried out sand over the surface. This will fill up the gaps in between the joints. www.eks-construction.co.uk

See, not as well challenging! Block paving is in fact rather easy, and can offer you exceptional outcomes if done right. Once you’ve finished, take your time to relax and appreciate all your hard work- you deserve it!